ControlLogix brings together the benefits of the Logix platform - common programming environment, common networks, common control engine - to provide the high-performance your application requires in an easy-to-use environment. The ControlNet network is an open, control network for real-time, high-throughput applications. The ControlNet network gives you deterministic, repeatable transfers of all mission-critical control data in addition to supporting transfers of non-time-critical data. The DeviceNet network is an open, low-level network that provides connections between simple industrial devices, such as sensors and actuators, and higher-level devices, such as controllers and computers. It uses the CIP to provide the control, configure, and data collection capabilities for industrial devices. It is a protocol designed for robust, distributed control of process control applications.
|Published (Last):||28 December 2015|
|PDF File Size:||8.72 Mb|
|ePub File Size:||12.52 Mb|
|Price:||Free* [*Free Regsitration Required]|
Follow this procedure to download the firmware from the support website. Follow the instructions on the website to access and download the firmware update kit. The download process requires you to enter the serial number of your RSLogix programming software. Make sure the network is connected. Click Next. Enter the firmware revision of the target device. RSLinx software starts. In the left pane, navigate to the DeviceNet communication link that contains the module you want to update.
Click the module you want to update. If it is not, unpredictable system operation may result. Click OK. Click Finish. When prompted, click Yes to start the update. When the update is complete, verify that the module resets and the front-panel status indicator displays the correct revision.
Choose the Upload EDS file or files from the device option. When the upload is completed, you see a dialog box similar to this one. You see the status of the EDS installation. Modify Module Keying You may need to change module keying to allow RSLogix software to recognize multiple firmware revisions. Follow this procedure to change module keying. Start RSLogix software. Right-click the module and choose Properties.
Rockwell / Allen-Bradley 1756-DNB Series B DeviceNet Communication Module
PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder. Give us a call at or We can help you with your Revision specific needs. Free Ground delivery on all orders! Close What is New Surplus? May indicate older date code.
The following table identifies what this manual contains and where to find specific information. The interior of this enclosure must be accessible only by the use of a tool. This industrial control equipment is intended to operate in a Pollution Degree 2 environment, in overvoltage category II applications, as defined in IEC publication A at altitudes up to meters Page 6: Identify Module Components 6 ControlLogix DeviceNet Scanner Module Change of state increases system performance by reducing network traffic, since data is only sent on an as-needed basis. Make sure the module properly connects to the chassis backplane.